  +86-510-88100967
Stainless Steel Special Alloys Manufacturer
Products
You are here: Home / Products / Steel Pipe Tube / Carbon Steel Pipe
Share to:

Carbon Steel Pipe

Keywords: carbon steel pipe,Seamless Steel Pipe, Seamless Stainless Steel Pipe, Steel Piping,steel pipe
Size: OD: 13.72-4064mm / WT: 1.65-40mm,Length: 0.5mtr-20mtr
Standard & Grade : API5L,ASTM A106/A53, DIN2391, ASTM A179/A192, EN10210,EN10208
Ends: Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends
Delivery: BKS, NBK,BK ,BKW, GBK(+A), NBK(+N), BK(+C)
Payment: TT, LC , OA , D/P
Packing: Bundle or bulk , seaworthy packing or for the client's requirement
Usage: For conveying gas, water and oil either in the oil or natural gas industries

Carbon steel pipe mainly refers to the carbon mass fraction is less than 2.11% without containing deliberately added alloying elements of steel, with the level of carbon contained in a steel being one of the most important factors to be influence on its the strength of the steel, the hardness increases, and reduces ductility, toughness and weld ability. Besides, it generally also contain a small amount of silicon, manganese, sulfur, phosphorus in addition to carbon. Compared to other types of steel, it is the earliest, low cost, wide range of performance, the largest amount. Suitable for nominal pressure PN ≤ 32.0MPa, temperature -30-425 ℃ water, steam, air, hydrogen, ammonia, nitrogen and petroleum products, and other media. Carbon steel pipe is the earliest to use the largest amount of basic material in modern industry. The world’s industrial countries, in efforts to increase high strength low alloy steel and alloy steel production, which is also very attention to improving the quality and expanding the range of varieties and use. Proportion of the production in the countries’ total output of steel, approximately maintained at about 80%, it is not only widely used in buildings, bridges, railways, vehicles, ships and all kinds of machinery manufacturing industry, but also in the modern petrochemical industry, marine development, has also been heavily used.


Carbon steel pipe is used for conveying oil , gas and other fluids. Standard: API SPEC 5L,ISO 3183,ASTM A 53M,ASTM A 106M,JIS G 3454,JIS G 3455, JIS G 3456

Standard: API SPEC 5L,ISO 3183,ASTM A 53M,ASTM A 106M,JIS G 3454,JIS G 3455,  JIS G 3456

Uses: For conveying gas, water and oil either in the oil or natural gas industries

Dimension:

SMLS: Φ10.3~1016×1.7~52mm

WELD: Φ219~2134×5~52mm


Sizes of Carbon Steel Pipe

Out Diameter(mm)

Wall Thickness(mm)


6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

35


73

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


76.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

82.5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

88.9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

101.6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

114.3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

127

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

139.7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

152.4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

159

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

168.3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

177.8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

193.7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

203

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

219.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

244.5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

273

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

298.5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

323.8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

339.7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

355.6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

406.4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

457.2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

473.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

508

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

530

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

558.8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

609.6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

630

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 




Standard

Type of pipe

Class

Grade

API SPEC 5L

ISO 3183

SMLS

PLS1

L245B, L290 X42, L320 X46 , L360 X52,

L390 X56, L415 X60, L450 X65, L485 X70

PLS2

L245N BN, L290N X42N, L320N X46N,

L360N X52N, L390N X56N, L415N X60N,

L360Q X52Q, L390Q X56Q, L415Q X60Q , L485Q X70Q


PLS2 Sour Environment

L245NS BNS, L290NS X42NS, L320NS X46NS

L360NS X52NS, L390NS X56NS, L415NS X60NS,

L360QS X52QS, L390QS X56QS, L415QS X60QS L485QS X70QS


WELD

PLS1

L245B, L290 X42, L320 X46, L360 X52

L390 X56, L415 X60, L450 X65, L485 X70

PLS2

L245M BM, L290M X42M, L320M X46M,

L360M X52M, L390M X56M, L415M X60M,

L450M X65M, L485M X70M, L555M X80M,


Grade:

Standard

Grade

ASTM A 53 M

A , B

ASTM A 106M

A, B, C

JIS G 3454

STPG 370, STPG 410

JIS G 3455

STPG370, STPG410, STPG480

JIS G 3456

STPG370, STPG410, STPG480

Note: Grades other than the a.m. chart can be made available through consultations.


Chemical Composition (%):

Standard

Grade

C

Si

Mn

P

S

Ni

Cr

Cu

Mo

V

ASTMA

53M

A

≤0.25

-

≤0.95

≤0.05

≤0.045

≤0.40

≤0.40

≤0.40

≤0.15

≤0.08

B

≤0.30

-

≤1.20

≤0.05

≤0.045

≤0.40

≤0.40

≤0.40

≤0.15

≤0.08

ASTM A 106M

A

≤0.25

≥0.10

0.27-0.93

≤0.035

≤0.035

≤0.40

≤0.40

≤0.40

≤0.15

≤0.08

B

≤0.30

≥0.10

0.29-1.06

≤0.035

≤0.035

≤0.40

≤0.40

≤0.40

≤0.15

≤0.08

C

≤0.35

≥0.10

0.29-1.06

≤0.035

≤0.035

≤0.40

≤0.40

≤0.40

≤0.15

≤0.08

JIS G 3454

STPG 370

≤0.25

≤0.35

0.30-0.90

≤0.040

≤0.040

-

-

-

-

-

STPG 410

≤0.30

≤0.35

0.30-1.00

≤0.040

≤0.040

-

-

-

-

-

JIS G 3455

STS 370

≤0.25

0.10-0.35

0.30-1.10

≤0.035

≤0.035

-

-

-

-

-

STS 410

≤0.30

0.10-0.35

0.30-1.40

≤0.035

≤0.035

-

-

-

-

-

STS 480

≤0.33

0.10-0.35

0.30-1.50

≤0.035

≤0.035

-

-

-

-

-

JIS G 3456

STPT 370

≤0.25

0.10-0.35

0.30-0.90

≤0.035

≤0.035

-

-

-

-

-

STPT 410

≤0.30

0.10-0.35

0.30-1.00

≤0.035

≤0.035

-

-

-

-

-

STPT 480

≤0.33

0.10-0.35

0.30-1.00

≤0.035

≤0.035

-

-

-

-

-

Note: Grades other than the a.m. chart can be made available through consultations.


Surface treatment of steel pipe:

In order to improve the service life of oil pipeline, surface treatment is usually carried out to facilitate the firm combination of steel pipe and anti-corrosive coating.Common processing methods are: cleaning, tool derusting, pickling, shot blasting derusting four categories.


1,cleaning Grease, dust, lubricant, organic matter adhered on the surface of steel pipe, usually using solvent, emulsion to clean the surface.However, the rust, oxide skin and welding slag on the surface of the steel pipe cannot be removed, so other treatment methods are needed.Tool rust removal Steel pipe surface oxide, rust, welding slag, can use steel wire brush to clean and polish the surface treatment.Tool derusting can be divided into manual and power, manual tool derusting can reach SA


2,level, power tool derusting can reach Sa3 level.If the surface of steel pipe is attached with a particularly strong oxide skin, it may be impossible to remove the rust with the help of tools, so we need to find other ways.


3,pickling Common pickling methods include chemistry and electrolysis.But only chemical pickling is used for pipeline corrosion protection.Chemical pickling can achieve a certain degree of cleanliness and roughness on the surface of steel pipe, which is convenient for subsequent anchor lines.Usually as a shot (sand) after reprocessing.


4,shot blasting for rust removal By high power motor drive the high-speed rotating blades, steel grit, steel shot, segment, minerals and other abrasive wire under the action of centrifugal force on steel pipe surface spray and mass ejection, thoroughly remove rust, oxides and dirt on one hand, on the other hand, steel pipe under the action of abrasive violent impact and friction force, to achieve the required uniform roughness.Among the four treatment methods, shot blasting and derusting is an ideal treatment method for pipe derusting. Generally, shot blasting and derusting are mainly used for inner surface treatment of steel pipe, and shot blasting and derusting are mainly used for outer surface treatment of steel pipe.


Product Inquiry
Pipe Fittings, Forged, Flanges, Fasteners
Feel Free to Call Us Now
+86-510-88100967
Worldwide Supply
From China

NAVIGATION

PRODUCTS

CONTACT

Hong Industry Group Co.,Ltd
Shuofang Industry Park,Xinwu District,Jiangsu Province
Tel: +86-510-88100967
              510-88101787
Email: sales@hongindustry.com
Web: www.hongindustry.com

SERVICE

Hong Industry Group Co.,Ltd offers a variety of value added services to accompany its core business as a major steel stockholder. These services are designed to offer you a more complete service, making it easier for you receive total steel solutions from one port of call.
Copyright  2020 Hong Industry Group Co.,Ltd. All rights reserved.