provide a wide range of Titanium Washers. Titanium Punched Washers is still weldable, and can be hot or cold formed using standard techniques such as hydropress, power brake, stretching and drop hammer methods.Good ductility allows Titanium Machined Washers to be cold formed at room temperature by standard techniques such as stretching, heading, stamping and drawing.
We offer these Titanium Flat Washers in custom-made shapes and sizes as per the requirements given by our clients, and that too at an affordable and market leading prices.our range of Titanium Square Washers are available in different dimentions, specification & thickness as per the clients requirements.
Standard Specification For Titanium Washers
| Material | Specification | Standards | Size | Length |
Titanium Washers | IS BS ASTM | ASTM B348 | M10 to M 36 | upto 5 Meters |
Titanium Washers Equivalent Grades
| Grade | Common Name | Related Specification | |||
| British | European | ASTM | UNS | ||
| Grade2 | 3.7035 | B348 | R50400 | ||
Chemical Composition of Titanium Alloy Washers
| Trade Names | C | Fe | O | H | N | Ti | Al | Y | V | Sn | Pd | Mo | Ni |
| Titanium Grade 2 | 0.08 Max | 0.3 Max | 0.25Max | 0.015max | 0.03 Max | Balance | – | – | – | – | – | – | – |
Titanium Washers Physical Properties
| Density | 4.5 g/cm3 |
| Melting Point | 1665 °C (3030 °F) |
| Tensile Strength | Psi – 49900 , MPa – 344 |
| Yield Strength (0.2%Offset) | Psi – 39900 , MPa – 275 |
| Elongation | 20 % |