We are provide a wide range of Titanium Hex Cap Screw. Titanium Hex Screws is still weldable, and can be hot or cold formed using standard techniques such as hydropress, power brake, stretching and drop hammer methods.Good ductility allows Titanium Socket Cap Screws to be cold formed at room temperature by standard techniques such as stretching, heading, stamping and drawing.
We offer theseTitanium Machine Screws in custom-made shapes and sizes as per the requirements given by our clients, and that too at an affordable and market leading prices.our range of Titanium Allen Cap Screws are available in different dimentions, specification & thickness as per the clients requirements. As a prominent Wholesaler and Exporter of Titanium Countersunk Slotted Screws, we are reckoned in the industryas amongst the top makers of these products. these Titanium Hex Cap Screws is somewhat weaker than Grade 3, but as said tougher than Grade 1 and in the same way resistant to corrosion.
Standard Specification For Titanium Screws
Material | Specification | Standards | Size | Length |
Titanium Screws | IS BS ASTM | ASTM B348 | M10 to M 36 | upto 5 Meters |
Ti Grade 2 Screws Equivalent Grades
Grade | Common Name | Related Specification | |||
British | European | ASTM | UNS | ||
Grade2 | 3.7035 | B348 | R50400 |
Chemical Composition of Titanium Alloy Gr 2 Screws
Names | C | Fe | O | H | N | Ti | Al | Y | V | Sn | Pd | Mo | Ni |
Titanium Grade 2 | 0.08 Max | 0.3 Max | 0.25Max | 0.015max | 0.03 Max | Balance | – | – | – | – | – | – | – |
Minimum Mechanical Properties for Titanium Grade 2 Screws
Yeild strength | Tensile strength | Elongation | Reduction |
Min 0.2% Mpa | Min Mpa | Min % | Min % |
275 | 345 | 20 | 30 |
Typical Mechanical Properties for Titanium Grade 2 Screws
Yeild strength | Tensile strength | Elongation | Reduction |
Min 0.2% Mpa | Min Mpa | Min % | Min % |
352 | 483 | 28 | — |
Titanium GR -2 Screws Physical Properties
Density | 4.5 g/cm 3 |
Melting Point | 1665 °C (3030 °F) |
Tensile Strength | Psi – 49900 , MPa – 344 |
Yield Strength (0.2%Offset) | Psi – 39900 , MPa – 275 |
Elongation | 20 % |